Fixing to tiled or riven walls

Mark wall as for gluing (see Section 14).

Run a narrow bead of silicone or construction adhesive along the bottom of the Eazy Hanger and another through the middle; it is important that this middle bead is not to plentiful or it will spread upwards and foul the slot.

Align the vertical centre lines and the bottom edge of the Eazy Hanger with the lower pencil line. Next, press firmly onto the wall. Keep applying pressure for 30 seconds. Leave for minimum of 24 hours to allow the glue to cure.

Place your picture flat against the wall with the picture strip slightly above wall strip. Gently slide your picture down the wall until it locates on the wall strip.

Tutorial Image

Fixing to tiled or riven walls video